Our industrial electric blow heater for hire is a 415 volt 3 phase heater. It has three settings 10kw, 15kw and 20kw. Depending on where it will be used, it can be either hard wired or supplied with a short cable and a plug.
This heater is suitable for locations where flames and fumes are not allowed such as bars, restaurants, hotels and on construction sites.
|Power Supply||415 V 3 ph 50 Hz Run 28 A (max)|
|Plug type||BS4343 32 A 3 ph 4 pin|
|Noise level ( max)||61 dBA @ 1 metre|
|Typical heated area||484m|
|Dimensions||470mm x 410mm x 580mm|
|Power consumption (max)||20k W / hr|
|Heating duty (max)||20 kW 68,240 btu|